HMS Vixen (1865)

From SpottingWorld, the Hub for the SpottingWorld network...
File:HMS Vixen (1865).jpg
HMS Vixen (left) and the barque Nightwatch (right) at Bermuda Dockyard between 1867 and 1873
Career (UK) Royal Navy Ensign
Name: HMS Vixen
Ordered: 22 March 1864[1]
Builder: Charles Lungley, Deptford[1]
Cost: £54,193[1]
Laid down: 1864
Launched: 18 November 1865[2]
Commissioned: 1866
Fate: Sold at Bermuda in December 1895
Sunk as a blockship c.1896[3]
General characteristics
Displacement: 1,228 tonnes[1]
Length: 160 ft (49 m)
Beam: 32 ft (9.8 m)[1]
Draught: 11 ft (3.4 m) maximum[3]
Propulsion: Two 2-cylinder horizontal single-expansion steam engines by Maudslay, Sons & Field
Twin screws
Sail plan: Barquentine rig (removed 1873)
Speed: 8.9 kn (16.5 km/h)[3]
Range: 1,080 nmi (2,000 km) at maximum speed[3]
Complement: 80
Armour: 4.5 in (11 cm) iron belt and bulkheads on 10 in (25 cm) of teak

HMS Vixen was an armoured composite gunboat, the only ship of her class, and the third ship of the Royal Navy to bear the name. She was the first Royal Navy vessel to have twin propellors.


Designed by the Admiralty, Vixen was a half-sister to HMS Viper and HMS Waterwitch, and all three were built mostly as experimental vessels. While Viper and Vixen were twin screw vessels, Waterwitch had a water-pump propulsion system. Viper differed from Vixen mainly in her iron construction.


Vixen was an armoured gunboat of the breastwork type. Her hull was of composite construction, with iron frames and iron bulwarks, but with an outer cladding of 140 mm (5.5 in) teak over the entire hull.[3] An armoured citadel protected her machinery and the ram bow was reinforced by massive ironwork structures.[3] Underwater, her hull was sheethed in copper to prevent marine growth. Vertical trunks were provided at the stern to lift the screws clear of the hull, thereby allowing a better hull-form for purely wind-driven sailing.


She was equipped with two sets of 4-cylinder horizontal single-expansion steam engines, each set powering one of her two-bladed, 9 ft diameter Maudslay & Griffiths screws.[3] In total she developed an indicated 740 horsepower, sufficient for a top speed of 8.9 knots (16.5 km/h).[1] Steam was provided by two Maudslay iron fire-tube boilers with six furnaces.[3]

Sail Plan

She was equipped with a Barquentine rig, but in 1873 all masts, rigging and upper deck obstructions were removed after the decision for Vixen and Viper to remain permanently in Bermuda.


Vixen was armed with two 7-inch (6½-ton) muzzle-loading rifled guns and two 20-pounder breach-loading rifled guns.[1] One of Vixen or Viper's 7-inch guns was displayed on the waterfront at St Georges as recently as 1991.[3]


Vixen was ordered from Charles Lungley of Deptford on 22 March 1864[1] and laid down the same year. She was launched on 18 November 1865 and commissioned in 1866 under Commander Spencer Phipps Brett for comparative trials. Her total cost was £54,193.[1]


Vixen, Viper and Waterwitch conducted comparative trials at Stokes Bay in the Solent 2-9 August 1876. Although turning ability was impressive, none of the ships attained more than 9.5 kn (17.6 km/h) in an era when HMS Warrior could achieve 14.5 kn (26.9 km/h).[3] Furthermore, Vixen was nearly lost in the Irish Channel during a winter gale in 1876,[3] making her unsuitable for the open sea under steam or sail. Vixen and Viper were towed to Bermuda in 1868 where the geography favoured the use of steam-powered rams.

In July 1869 both ships were employed to bring the Floating Dock Bermuda from The Narrows to the dockyard,[4] and in 1870 Vixen rescued a disabled barque.[3] 1873 saw the loss of all rigging, masts and upperdeck equipment, and this must have helped her to survive the 1878 hurricane which caused serious damage to the Floating Dock and other dockyard facilities. In 1895 she was used as an accommodation hulk for dockyard labourers and in 1895 listed as 'to be sold' in the Navy List.

The Daniel’s Head Channel Act (1887) had authorised the sinking of a blockship to close the channel, but the Hydrographer’s Report of 1888 declared the approaches from that direction safe from attack. By December 1895 Vixen had been sold to a local scrap merchant. In 1896 Vice-Admiral James Erskine recommended the channel be covered by shore batteries against torpedo boat attack, and in order to make such boats pass close to Daniel's Head, Vixen was sunk in the channel, probably the same year.[3]


Once her engines had been removed, she was placed across the Chubb Cut and massive scuttling charges were detonated. Her keel was broken, and she settled in her final resting place. Vixen now lies in 10 m (33 ft) of water about 0.2 nmi (0.37 km) offshore from Daniel’s Head, at the west end of Bermuda. She lies in a narrow gap in the coral reef, with the bow just above water. She is well-known locally and is often visited by glass-bottomed boats and divers. The wreck is visible on satellite imagery in position 32°18′21.60″N 64°53′8.40″W / 32.306°N 64.885667°W / 32.306; -64.885667.[3]

Investigation of the wreck

In 1986 Professor Richard Gould began his investigation of the wreck with volunteers from EarthWatch and support from the Bermuda Maritime Museum. By 1988 they had amassed 13 weeks of diving at the site, and in 1991 Gould published The archaeology of HMS Vixen, an early ironclad ram in Bermuda in The International Journal of Nautical Archaeology, giving a comprehensive account of the construction, history and fate of the ship.

Commanding Officers

From To Captain
29 September 1866 25 January 1867 Commander Spencer Phipps Brett[5]
17 June 1867 Commander Charles David Lucas[5]
17 June 1868 Commander Louis Hutton Versturme[5]


External links