USNS Apache (T-ATF-172)

For other ships of the same name, see USS Apache.

USNS Apache in the Atlantic Ocean USNS Apache in the Atlantic Ocean, 2004
Career (US)
Name:	USNS Apache
Namesake:	The Apache, the collective term for several culturally related groups of Native Americans originally from the American Southwest
Operator:	Military Sealift Command
Builder:	Marinette Marine Corporation, Marinette, Wisconsin
Laid down:	22 March 1979
Launched:	28 March 1981
Sponsored by:	Mrs. John R. Young
Acquired:	23 July 1981
Homeport:	Norfolk, Virginia
Motto:	"First in Tow and Salvage"
Fate:	Active in service as of 2009
General characteristics
Displacement:	1,387 long tons (1,409 t) light 2,260 long tons (2,296 t) full
Length:	226 ft (69 m)
Beam:	42 ft (13 m)
Draught:	15 ft (4.6 m)
Installed power:	7,200 hp (5,400 kW)
Propulsion:	Two GM EMD 20-645F7B diesel engines, 3,600 hp (2,700 kW) each; two shafts; Kort nozzles; controllable pitch propellors; bow thruster, 300 horsepower (224 kilowatts)
Speed:	14.5 knots
Range:	10,000 nautical miles (18,520 kilometers)
Complement:	16 civilians, 4 U.S. Navy personnel (communications unit), room for 25 transients

USNS Apache (T-ATF-172), fifth United States Navy ship of the name, is the last of the Powhatan class of fleet ocean tugs. Apache was delivered to the U.S. Navy in 1981. She is operated by Military Sealift Command and crewed by 16 civil service mariners (CIVMARS) with a complement of up to 4 Navy enlisted personnel to operate communications equipment. She is designed to provide the Navy with towing service, and when augmented by Navy divers, assist in the recovery of downed aircraft and ships. There are quarters onboard for up to 25 additional personnel.

Background

Fleet ocean tugs are used to tow ships, barges and targets for gunnery exercises. They are also used as platforms for salvage and diving work, as participants in naval exercises, to conduct search and rescue missions, to aid in the clean up of oil spills and ocean accidents, and to provide fire fighting assistance.

Features

Apache is equipped with a 10 ton capacity crane and a bollard pull of at least 87 tons. A deck grid is fitted aft which contains 1-inch (25 mm) bolt receptacles spaced 24 inches (610 mm) apart. This allows for the bolting down of a wide variety of portable equipment. The large back deck is also painted for helicopter operations to allow for vertical replenishment at sea. There are two GPH diesel off-ship fire pumps supplying three fire monitors with up to 2,200 gallons of foam per minute. A deep module can be embarked to support naval salvage teams.

Propulsion

File:USS Barry (DD-933) towed by USNS Apache (T-ATF-172).jpg

Apache towing the decommissioned destroyer USS Barry (DD-933).

Apache has twin GM EMD 20-645F7B diesel engines providing a total of 7,200 shaft horsepower capable of hauling large tows at speeds up to and exceeding 8 knots (15 km/h), and light boat at 14.5 knots (26.9 km/h). The shafts are connected to controllable pitch propellers (CPP). The engines can be operated from one of three stations on the bridge, at the engine operating station, and from an aft control station looking astern. Usually controlled from the bridge by deck officers, they allow control of the engines' RPMs and propeller pitch independently. Together with twin rudders and a 300 horsepower (220 kW) bow thruster, the ship is highly maneuverable at slow speeds with extremely quick engine response.

Towing equipment

The vessel can employ one of two winches for towing operations. The main towing winch for large, long distance tows is a single drum, closed-loop SMATCO electro-hydraulic drive winch, with a mechanically, pneumatically, or hydraulically actuated band brake and an air-actuated dog brake which are capable of holding 500,000 lbf of tension. The winch has 2,500 feet (760 m) of 2¼ inch IWRC 6×37 wire rope with a poured end fitting and a breaking strain of 424,000 lbf (1.89 MN). The cable weighs approximately 8.5 lb per foot (12.6 kg/m), making the weight of the wire approximately 21,500 lb (10.75 short tons) excluding the weight of any chain bridle used on the vessel being towed.

The second winch is a traction machine capable of handling up to 15-inch (380 mm) synthetic hawsers used for smaller, shorter distance tows. The traction machine is capable of line pulls of up to 200,000 lbf (Template:Convert/kN).

The stern employs a tow-pin box capable of capturing either the wire or synthetic towing lines, as well as norman pins at the quarters.

Service history

Apache began service with the Military Sealift Command in 1981 in the Atlantic. Among her early assignments was a mission in September 1982 towing the battleship USS Iowa (BB-61) from the Philadelphia Naval Shipyard at Philadelphia, Pennsylvania to Westwego, Louisiana, where Iowa began modernization work preparatory to her return to active service.

[1982-present]

Sources

• This article includes text from the public domain Dictionary of American Naval Fighting Ships. The entry can be found here.
• NavSource Online: Service Ship Photo Archive USNS Apache (T-ATF-172)
• Military Sealift Command Ship Inventory: USNS Apache (T-ATF-172)
• U.S. Navy Fact File: Fleet Ocean Tugs – T-ATF
• Unofficial U.S. Navy Site: USNS Apache (T-ATF 172)