MV Sorrento (2001)
 The MV Sorrento on Port Phillip Bay | |
| Career | |
|---|---|
| Name: | MV Sorrento[1] |
| Operator: | Peninsula Searoad Transport Pty Ltd |
| Port of registry: |
 Australia |
| Builder: | Seward Marine |
| Laid down: | Launceston, Tasmania, Australia |
| Identification: |
IMO Number: |
| General characteristics | |
| Class and type: | Double-ended, roll-on/roll-off catamaran |
| Tonnage: | 3,200 GRT (approx) |
| Length: | 64.1 m (210.3 ft) |
| Beam: | 17.4 m (57.1 ft) |
| Draft: | 2.3 m (7 ft 6.6 in) |
| Installed power: | Diesel, 2 x Cummins KTA-38-M2, 1,300 hp at 1,800 rpm. |
| Propulsion: |
2 x Ulstein Aquamaster US 1201 CRP Azimuth thrusters Auxiliary: 2 x Kamewa Ulstein 45 TV controllable pitch side thrusters (300 kW/18); Cummins KTA38 / Onan 837 for bow thruster motor; 2 x Cummins 6BT 5.9 G2M gensets |
| Speed: | 11 knots |
| Capacity: |
700 passengers 80 cars |
| Notes: | Fuel capacity: 80,000 litres |
The MV Sorrento is a double ended roll-on/roll-off vehicle ferry owned by Peninsula Searoad Transport of Victoria, Australia. It has operated between the heads of Port Phillip Bay between the towns of Queenscliff and Sorrento since 2000. It is the sister ship of MV Queenscliff, and on entering service enabled a doubling in the service frequency across the bay. The ferry can carry approximately 80 vehicles and 700 passengers.[1]
Loading and uploading
The MV Sorrento is fitted with ramps at the bow and stern of the ship to allow vehicles to roll on at the start of the voyage and roll off at the end of the voyage. This results in a fast turnaround time, with all vehicles and passengers embarking and disembarking in approximately 15 to 20 minutes. The ferry was designed to use the existing loading facilities used by the sister ship MV Queenscliff.
At Queenscliff, the ship docks bow into the terminal. The bow of the ship consists of two sections; one section raises whilst the other lowers forming a ramp that allows vehicles to drive off. Once all vehicles and foot passengers have disembarked the ship, vehicles travelling to Sorrento then board and face the stern of the ship for the voyage. At Sorrento, the ship docks stern into the terminal. A ramp at the stern of the ship lowers allowing vehicles to drive off. Once all vehicles and foot passengers have disembarked, vehicles travelling to Queenscliff then board and face the bow of the ship for the voyage.
Foot passengers embark and disembark the ship, via the same ramps that vehicles do, under the direction of the ship's crew in between the embarkation and disembarkation of vehicles.
References
- ↑ 1.0 1.1 "Searoad - The Vessels". http://www.searoad.com.au/flash/searoad.htm. Retrieved 2007-08-13.
- ↑ "Sorrento". Marine Traffic. http://www.marinetraffic.com/ais/shipdetails.aspx?MMSI=503320500. Retrieved 24 April 2009.
External links
| ||||||||
| 30px | This Australia-related article is a stub. You can help Ship Spotting World by expanding it. |
